8
P - LOCATING TROUBLE
1. No water delivered
a. Wrong direction of rotation
b. Impeller or pipes plugged
c. Discharge head too high
d. No water in pit
e. Pump suction to close to bottom of pit
2. Not enough water delivered
a. Discharge head higher than expected
b. Impeller or pipes partly plugged
c. Improper impeller adjustment
d. Low water level in pit
e.
Mechanical
defects
1. Impeller worn or damaged
2. Casing worn
f. Wrong direction of rotation
3. Not enough pressure
a. Air in water
b.
Mechanical
defects
c. Impeller diameter too small
d. Wrong direction of rotation
e. Impeller not properly adjusted
f. Discharge head (line friction) lower than expected
4. Pump takes too much power
a. Speed too high for required head and capacity
b. Head lower than rating; pumps to much water
c. Liquid either viscous or heaver than water or both
d.
Mechanical
defects
1. Shaft bent
2. Impeller binds in casing
e. Strain on pump caused by piping misalignment
f. Impeller not adjusted properly
Chair Bracket Mounting
1
Motor Support
2
Motor Mounting Screw
3
Lock Nut
4
Motor Foot
5
Motor Anchor Cap Screw
Summary of Contents for DEMING 5460 Series
Page 12: ...Notes ...
