Crane BARNES RAZOR ZOGP Series, Installation Manual

Page: 4 / 23

4
PUMP SPECIFICATIONS:
inches
(mm)
DISCHARGE ....................... 1¼”
LIQUID TEMPERATURE .... 104°F (40°C) Continuous
MOTOR HOUSING ............. Cast Iron ASTM A-48, Class 30
VOLUTE .............................. Cast Iron ASTM A-48, Class 30
SEAL PLATE ...................... Cast Iron ASTM A-48, Class 30
IMPELLERS
Design ............ 12 vane, Splitter-Type, vortex, with
pump out vanes
on back side. Dynamically balanced,
ISO G6.3
Material ........... 85-5-5-5 Bronze
CUTTER PLATE ................. Hardened 440C Stainless Steel
Rockwell® C-55
CUTTER .............................. Hardened 440C Stainless Steel
Rockwell® C-55
SHAFT ................................. 416 Stainless Steel
O-RING ................................ Buna-N
HARDWARE ....................... 300 Series Stainless Steel
PAINT .................................. Powder Coat
SEAL Design ............. Single Mechanical, oil filled reservoir
Material ........... Rotating Faces - Silicon-Carbide
Stationary Faces - Silicon-Carbide
Elastomer - Buna-N
Hardware - 300 series stainless steel
CORD ENTRY ..................... Custom Molded, Quick Connected
for sealing and strain relief
CORD .................................. CSA/UL Approved 12/5
Type SOW
SPEED ................................ 3450 RPM, 60Hz
2875 RPM, 50Hz
UPPER BEARING:
Design ............. Single Row, Ball
Lubrication ...... Oil
Load ................ Radial & Thrust
LOWER BEARING
Design
............. Single Row, Ball
Lubrication ...... Oil
Load ................ Radial & Thrust
MOTOR Design ............. NEMA L, Oil Filled,
Squirrel Cage Induction
Insulation
........ Class F
SINGLE PHASE .................. Capacitor start/capacitor run
LEVEL CONTROLS: .......... SOLD SEPARATELY, Model
ESPS-150™, Environmentally
sealed pressure switch with CPVC
housing, HNBR diaphragm, Custom
Molded Quick Connect for Sealing
and Strain Relief
OPTIONAL EQUIPMENT .... Additional Cord, Automatic to Manual
Adapter Plug Kit, BSP Check Valve
Kit, C-Channel Rail Check Valve Kit,
NPT Check Valve Kit, Base Kit
ZOGP20__CC - For “C” Channel
Shown with optional C-Channel
28.19
(716)
24.79
(630)
3.68
(94)
7.37
(187)
11.35
(288)
19.75
(501.71)