38
Handling
AUS
of the blood pressure monitor and a connect to the
app will be established (see
fig. A and B).
4. As soon as a connection has been established, the
Bluetooth® symbol will stop blinking and all meas-
urements will automatically be transferred to the
app.
5. Once the transfer is successful, the Bluetooth® sym-
bol on the display will go out. The device will switch
to sleep mode. If it is not possible to perform a trans-
fer, the display will show the Bluetooth® symbol and
the error code “E7” (see chapter “Troubleshooting”).
Viewing the measurements on the
measurement computer
You can also view the measurements you saved directly
on the measurement computer without a smartphone
or tablet. Proceed as follows to do so:
1. Activate the user touch buttons on the
measurement computer with the ON/OFF switch
9
(see
fig. A).
2. Switch to memory mode by touching user 1 touch
button
10
or user 2 touch button
8
for approx.
three seconds until the WHO-LED lights up with the
average value for all measurements (see
fig. A).
3. You can now browse through the measurements of
the respective user with the user 1 touch button
10
or user 2 touch button
8
(see
fig. A). Tap the re-
spective button once to browse further.
