M138.x Page
6
of
6
April 17, 2015
SERVICE INFORMATION
15. Close main Door and inspect part. If Card Reader Blank Bezel is overtightened it will appear warped.
Loosen screws as needed to allow part to flatten out.
a.
16. Install the Monetary Door Assembly on the Main Door and secure by tightening the 3 screws loosened
in step 8.
17. Install the Coin Reject Motor Assembly and secure by tightening the 2 screws loosened in step 6.
18. Plug the harnessing in the LED Driver Board that were unplugged in step 5.
19. Place LED Driver Board Cover back in position and secure by tightening the 2 screws loosened in step
3.
20. Turn power on to vender. Test for proper operation.
