OPERATOR’S MANUAL
38
SECTION 2
LOADING A BOTTLE
Position the white pegs on the top, so that they grip the
bottle evenly when the black adjustment knob is tightened
to hold the bottle. (Try to get the bottle as near to the
centre of the round turntable as possible). It is possible to
clamp a bottle or container from 10mm to 130mm in
diameter. Ensure that the white pegs are properly seated
in the slots so that they cannot rotate when the bottle
closure is turned
.
MEASURING THE TORQUE
Select the desired operating mode from Section 1. Tighten
or release the closure as required to obtain readings.
MOUNTING THE UNIT
The DTT Opta is designed for optional wall mounting as
shown in the details below. The fixings are not supplied.
Fixing hole positions
