background image

- 45 -

VI - COMMISSIONING

1 - PROTECTION OF THE INSTALLATION

To guarantee the boiler shell, 

it is

 recommend

ed

 that only 

the following

 heating system 

water 

conditioning products are used:

- BIONIBAL corrosion inhibitor
- BIONIBAGEL antifreeze and corrosion inhibitor.

1.1 - Bionibal

BIONIBAL

 is a non-toxic, biocide, traceable 

corrosion inhibitor specially designed to protect 
multi-metal heating circuits.

Through its efficient means of acting against all 
types of corrosion and all types of bacteria, 
BIONIBAL:
- Prevents the formation of rust and metallic 

sludge,

- Prevents the formation of algae and bacteria 

sludge,

- Also suitable for under-floor heating systems,
- Prevents off-gases,
- Contains an internal marker so that doses can be 

easily controlled.

BIONIBAL DOSAGE:

- Without under-floor heating: 1% (0.5 l of 

BIONIBAL for 50 l of water).

- With under-floor heating: 2% (1 l of BIONIBAL for 

50 l of water).

1.2 - Bionibagel

BIONIBAGEL

 is the antifreeze version of 

BIONIBAL.

Non-toxic antifreeze, with glycol monopropylene 
base, corrosion inhibitor, biocide, traceable.

In addition to the characteristics of BIONIBAL, it 
protects the installation from frost for residences 
that are not inhabited all the year round or that are 
in the coldest regions.

BIONIBAGEL DOSAGE:

The number of litres of BIONIBAGEL to put in the 
circuit depends on the volume of your installation 
and the extreme temperature of your region.

Important warning

Bionibal or Bionibagel must only be put in a clean installation that has been checked. It is 
therefore imperative to fill the entire system one or more times with clean water as required. 
In some cases, the system may need washing by a suitable product:

Example:
- In a new installation: To detect any leaks and eliminate any traces of welding, weld solder 

or other residues.

- On an old installation: To eliminate any trace of sludge and other products in the radiators, 

under-floor heating system and the boiler. 

!

Protection 

limit 

temperature

Installation capacity (litres)

50

100

150

200

- 5°C

7

15

22

30

- 10°C

12

25

37

50

- 15°C

17

35

50

70

- 20°C

20

40

60

80

- 30°C

22

45

67

90

!

Summary of Contents for THI 10-50c



































































Reviews: