USING N8 WITH CAMDEN EC1 and
CAMDEN EC2
N8 is compatible with all C.A.S.T.-enabled devices including Camden EC1 and Camden
EC2 microphone preamps. These preamps feature a tight C.A.S.T. integration that
patches their preamp outputs and headphone amp mixers to N8 through a single
C.A.S.T. connection rather than 4 discrete XLR cables.
The diagram above displays the connectivity that is possible using N8 and Camden
EC2.
The line outputs Camden EC2’s preamps are sent through its C.A.S.T. connection, Into
N8’s C.A.S.T. Input
[1]
and out of its DB25 Output Connector
[4]
for recording. At the
same time, audio connected to the DB25 Input Connector
[3]
is sent through N8,
through C.A.S.T. and to the headphone output of the connected Camden EC2 for
advanced monitoring.
Up to 4 Camden EC1 and EC2’s can be connected to a single N8 and doing so will
enable you to position the preamps and their monitoring facilities around the studio to
wherever they need to be.
Page 6
©2022 Cranborne Audio Ltd
