manualshive.com logo in svg

Cramer TOURNO compact 115, Operation Manual

Share
Download
Cramer TOURNO compact 115 Operation Manual Download Page 9

TOURNO 696.01-01 

9 of 26 

As of 2014 

Original Operation Manual English 

Motor-gear connection 

 

You may move the machine manually by setting the lever for the motor-
gear connection as follows:

 

 

 

Drive via motor 

Motor is decoupled, manual pushing is possible.

 

The lever is located behind the left front wheel.

 

 

On the all-wheel drive version only, there is a second lever behind the 
left rear wheel. 

The lever is located behind the left rear wheel (all-wheel drive). 

Note!  

Do not start the machine in the manual setting - potential damage to gear.

 

 

Accelerator pedal 

 

Forward 

The accelerator pedal has a progressive drive in two directions. 
 
Forward:   Push the upper pedal downward with your foot.          
                                              
Backward: Push the lower pedal downward with your foot.  
 

Neutral 

Reverse 

 

Parking brake 

 

 

Push the lever for the parking brake. 

 

Brake on 

Brake off 

Note! 

The machine cannot be started with the parking brake on. 

Summary of Contents for TOURNO compact 115



























Reviews:

No comments

Brands by name

Popular brands

Load more brands