Original Operation Manual
Sweeper 689.04-40
- 8
3.6
Working position and areas of risk
Working position:
Behind the machine on the handles
Areas of risk:
•
Catchment area of sweeping brushes
•
Ejection area of sweeping brushes
3.7
Accessories and spare parts
Original parts
Only original spare parts and original accessories may be used.
4
Delivery, transport, storage
4.1
Delivery
Risk of high dead weight
•
The machine must not be lifted manually.
•
Pull the machine off the transporter by the steering
bracket.
Transport inspection
•
Check the machine for completeness and potential
damage upon delivery.
•
Assembly and start-up are to be performed by the
specialist dealer.
4.2
Transport
Transport without packaging
•
Shut down the machine.
•
Apply the parking brake.
•
Close the petrol tap.
•
Fix the machine by using lashing straps.
4.3
Storage
•
Do not store the machine in the open air.
•
Do not expose it to aggressive materials.
•
Clean machine with a soft brush before start up.
5
Start up (first machine inspection)
5.1
Safety
Unauthorized restart
•
It is prohibited to start the machine while another person
is working on it.
Risks of insufficient order and cleanliness
•
Clean the machine from dried dirt and sand regularly.
•
Check the machine for blocking objects.
Risks of non-applied protection devices
WARNING !
Risk of injuries by rotating brushes!
Parts of the body may be seized if you reach into the
sweeping brushes.
Lack of covers may cause injuries by flinging materials.
Do not reach into the brushes during operation.
Do not open or remove any covers during operation.
5.2
Requirements at location of use
•
Only leave the machine on plane surfaces and solid
ground.
•
Only mount accessories on plane surfaces and solid
ground.
5.3
Assembly
Please observe the Assembly Instructions in the Annex of
this Operation Manual.
5.4
Start-up and functional test
Machine start
1.
Fill the fuel tank
2.
Put on protection equipment
3.
Open fuel tap (except KM Domus)
4.
Set throttle to Start/Choke
5.
Slightly pull starter lever to resistance
6.
Strongly pull starter lever
7.
Carefully return starter lever
8.
Set throttle to MAX/full throttle
