3
cramer.eu
GB
EN
Clearing Tines Of Foreign Objects
During operation, a stone or root could become lodged in the tines, or tall grass or
weeds may become wrapped around the tine shaft. To clear the tines, release the
trigger lever. Unplug the cultivator, and dislodge or remove any obstacles from the
tines or tine shaft. To ease removal of tall grass or weeds that are wrapped around
the tine shaft, remove one or more of the tines from the tine shaft.
Troubleshooting
PROBLEM
PROBABLE CAUSE
POSSIBLE SOLUTION
Motor fails to
start when
switch trigger is
depressed.
Battery is not
secure.
To secure the battery pack, make
sure the latch on bottom of the
battery pack snaps into place.
Battery is not
charged.
Charge the battery pack according
to the instructions included with
your model.
Motor runs but
tines do not
move.
Stone or root could
become lodged in
the tines.
To clear the tines, release the
trigger lever. Unplug the tiller, and
dislodge or remove any obstacles
from the tines or tine shaft.
Tall grass or weeds
may become
wrapped around the
tine shaft.
To ease removal of tall grass or
weeds that are wrapped around the
tine shaft, remove one or more of
the tines from the tine shaft.
Gear train failure.
Take unit to authorized service
center.
Technical Data
PROPERTY
VALUE
Blade diameter
225 mm
