SYSTEM SETUP
(Note: The TV system in US, Canada and Mexico is NTSC).
DVD).
►
~
Press the
▲
or
▼
~
Rate levels:
PAL, AUTO or NTSC.
( Function depends the recording of
menu will appear.
The Colum of New Password will be highlighted.
to set it On (activate the
rating level setting) or
New password setting menu will appear.
the ENTER Button to save the setting and exit.
setting to default setting or
rection and ENTER Buttons to set to
1.
If TV Type is selected, using the Di
of the available language.
2. If Audio, Subtitle or Disc Menu is selected, using the Direction and ENTER Buttons to set the priority
3. If Parental is selected, using the Direction and ENTER Buttons to set the rating level as desire as follow:
~ Enter the four digit password ( default password is 4010 ) by pressing the Numeric Buttons.
~ Press the ENTER Button to save the settings and exit.
1 KID SAFE: Kid safe
Off
(Password is needed).
4.
If Password is selected, press the ENTER Button to enter, the sub setting
~
If Password Mode is selected, using the Direction and ENTER Buttons
~
If Password is selected, press the ENTER Button twice to enter. The
~
Enter the new password again. OK Button
will be highlighted.
Press
on the screen
5.
If Default is selected, using the Direction and ENTER Buttons to reset all
press the SETUP Button to exit without changes.
Button to enter, the rating level list will highlight.
Button to select the desired level as below.
~ Press the ENTER Button to enter, password enter window will pop up.
Preference Setup Page:
Video Setup Page:
~ Enter the four digit old password.
~ Enter new four digit password. The Column of Confirm Pwd will be hightlighted.
~ Set to CVBS if you connected TV through the Video/Audio Output Jacks as page 9.
~ Set to YUV if you connected TV through the Y; Pb/Cb and Pr/Cr Jacks.
1. If Component is selected, using the Direction and ENTER Buttons to set it to CVBS or YUV
as the connection of TV.
2. If
is selected, using the Direction and ENTER Buttons to
HDMI Resolution
video output through the HDMI Port and YUV Jacks.
your TV through A/V Out Jacks then set the HDMI to lower resolution.
~ If your TV not support 50Hz, set the resolution to 480p; 720p; 1080i or 1080p.
select and set the resolution of the digital
NOTES:
~ Make sure your TV is support the resolution of the settings. Otherwise, no pictures shows on your TV.
In this case, connected the Player to
~
Press the Direction
Direction
2 G: All ages
3 PG: Parental Guidance
4 PG 13: Parental Guidance less than 13 years old
5 PGR:
: Under 17 years old, Parental Guidance suggested
6 R: Under 17 years old, Parental Guidance strongly
7 NC 17: 17 years old or above
8 ADULT: Adult only
Password enter window will pop up. Enter the four
digit password ( default password is 4010 ) by pressing the Numeric Buttons. Press the ENTER Button
to save the settings and exit.
-18-
Summary of Contents for CVD401A
Page 2: ......
