Craig CTFT751tk, Owner'S Manual

Page: 18 / 24

SYSTEM SETUP
Setting Menu
:
Press the SETUP button, the setting menu will appear on the screen as below. Using
to select and highlight the function you need to set or reset. Press the OK button
After setting, press the SETUP button to save the settings and exit.
GENERAL SETUP
1. If TV Shape is selected, using the Direction and OK buttons to set the aspect ratio to match the playing movie.
2. If Angle Mark is selected, using the Direction and OK buttons to set it On or Off. If set to On, when multi-angles
are available on the playing DVD, the multi-angle logo will appear on the screen.
3. If OSD Lang (On Screen Display Language) is selected, using the Direction and OK buttons to set the OSD
language as desired.
4. If Captio elected, using the Direction and OK buttons to set it On or Off. If set to On, when captions available
on the playing DVD, it will show on the screen automatically.
5. If Screen saver is selected, using the Direction and OK buttons to set it On or Off. If set to On, the screen saver
will come on when the unit stops or the image is paused for approximately five minutes.
6. If Last Memory is selected, using the Direction and OK buttons to set it On or Off. If set to On, the unit will start
playback from the position where the disc was stopped last time.
ETUP
If Speaker Setup is selected, press the OK button to enter. Downmix setting menu will appear, using the Direction and
OK buttons to set it to Lt /Rt or Stereo.
~If set to LT/RT, the rear left or rear right channels will play on both Left and Right Speakers.
~If set to Stereo, the rear left channel will play on the Left Speaker; the rear right channel will play on Right Speaker.
DOLBY DIGITAL SETUP
1. If Dual Mono is selected, using the Direction and OK buttons to set it to Stereo, L-Mono (Play Left channel on all
speakers), R-Mono (Play Right channel on all speakers) or Mix-Mono (Mixed Right and Left channel then plays
on all speakers) as desired. (Functions depend on the recording of the disc).
2. If Dynamic is selected, using Direction and OK buttons to set the dynamic level as desired or turn it off.
17
n is s s
the Direction buttons
to enter or confirmed the selection.
TV Shape Wide
Angle Mark On
Normal/Ps
Normal/Lb
Wide 16:9
OSD Lang
Go To General Setup Page
Dolby
Captions On
Screen Saver On
Last Memory On
SPEAKER S