- EN 5 -
LOCATION OF CONTROLS:
1.
AM/FM (Power On-Off/AM-FM Selection /Alarm Off) Button
2. /PRESET/TIME (Memory Up/Memory preset/Time set) Button
3. VOLUME / AL.1 (Volume - / Alarm 1 set) Button
4. VOLUME / AL.2 ( / Alarm 2 set) Button
5. TUNING /MINUTE (Tuning Down/Minute set) Button
6.
7. SNOOZE / SLEEP Button
8. PM Indicator
9. Buzzer (Alarm 1) Indicator
10. Radio (Alarm 1) Indicator
11. Buzzer (Alarm 2) Indicator
12. Radio (Alarm 2) Indicator
13. LED Display
14. Speaker
15. FM Antenna
16. DC IN Jack
17. Battery Compartment
1
2
3
4
5
6
7
8
9
10
13
11
12
14
15
16
17
13
18
18. Sleep Indicator
AM/FM VOLUME TUNING PRESET
AL. 1
MINUTE HOUR TIME
TUNING /HOUR(Tuning Up/Hour set) Button
OPERATION
--
SLEEP
To set or reset the actual time:
1. Make sure the unit is in radio power off mode before setting.
2. Press and hold the O/PRESET/TIME Button on the top of unit until the time on display is blinking.
Press the TUNING /MINUTE or TUNING /HOUR Buttons to set minute and/or hour.
3. When finished, press the O/PRESET/TIME Button to save the setting and exit, the display will stop
blinking.
(Make sure the PM Indicator on the display is light if the time is PM and not light if the time is AM).
Radio reception
1. Press the -- AM/FM Button to turn on the radio.
2. The radio frequency will appear on the display. Press the -- AM/FM Button repeatedly to
select AM or FM band as desire.
3. Press and hold the TUNING /MINUTE or TUNING / HOUR Buttons until the displayed
frequency starts running then release the button to auto searching available radio station.
A. When a radio station is found, the frequency on display will stop running and start playback
automatically.
B. If reception is no good, press the TUNING /MINUTE or TUNING /HOUR Buttons
repeatedly to fine tune.
AL. 2
