USING THIN CUTTING DIES
Depending on the brand of cutting die in use, different platform combinations
may be required. Please reference “Using Other Brands” for guidelines.
Important: Never place a shim
as the top or bottom layer of
the platform combination.
Tip: If the cut is incomplete,
add an additional shim
between base
(‘B’, ‘C’, or ‘D’).
plat forms
Tip: Do not place cutting
edge against base platforms
(‘B’, ‘C’, or ‘D’).
Platform D
Shim
Platform C
Platform B
Platform A
Cutting Die
Material
Optional: Place the shim(s)
between base
platforms (‘B’, ‘C’, or ‘D’)
Position cutting die blade side
up, smooth side sitting on
base platforms ‘B’ ,‘C’, & ‘D’.
Position material over the
cutting die. Position
platform ‘A’ on top of
the material to be cut.
Remove the combination
once the motor stops running.
Release when the rollers begin
pulling the platform combination
into the machine.
Keeping the platform combination
straight, guide into the eBosser
with steady forward motion.