background image

1

English

COMPONENTS

Front handle

recoil starter

Fuel tank

Engine switch

Throttle trigger lockout

Rear handle

Throttle trigger

Handle Locking knob

Air filter

10 

Unsharpened plate

11 

Cutting device

12 

Mixing fuel tank

13 

Soket spanner

14 

Screw driver

Fig. A

 

WARNING: Read all safety warnings and all 

instructions. 

Failure to follow the warnings and 

instructions may result in electric shock, fire and/or 
serious injury.

 

WARNING: 

Never modify the product or any part of 

it. Damage or personal injury could result.

WARNING:

 To reduce the risk of injury, read the 

instruction manual.

if you have any questions or comments about this or 

any product, call CRAFTsMAn toll free at: 

1-888-331-4569.

Definitions: Safety Alert Symbols and Words

This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk 
of personal injury or property damage.

 

DANGER:

 Indicates an imminently hazardous situation which, if not avoided, 

will 

result in 

death or serious injury

.

 

WARNING:

 Indicates a potentially hazardous situation which, if not avoided, 

could

 result in 

death or serious injury

.

 

CAUTION:

 Indicates a potentially hazardous situation which, if not avoided, 

may

 result in 

minor or moderate injury

.

 

(Used without word) Indicates a safety related message.

NOTICE:

 Indicates a practice 

not related to personal injury

 which, if not avoided, 

may

 result in 

property damage

.

3

7

4

8

9

5

12

13

14

6

10

11

1

2

Summary of Contents for CMXGHBD7186












Reviews: