Craftsman CMXEVCVVJC507P, Instruction Manual

Page: 6 / 40

6
ENGLISH
WARNING:
ONCE YOU HAVE
COMPLETED VACUUMING, FLIP THE
ON/OFF SWITCH TO THE ‘O’ OFF POSITION
AND UNPLUG THE POWER CORD FROM THE
OUTLET. O = OFF I = ON
BLOWER OPERATION
This Wet/Dry Vacuum has blowing capabilities.
To use the blower feature follow the instructions
listed.
WARNING:
ALWAYS WEAR
SAFETY GOGGLES COMPLYING WITH ANSI
Z87.1 (OR IN CANADA, CSAZ94.3) WHEN
USING BLOWER.
WARNING:
KEEP BYSTANDERS
CLEAR FROM BLOWING DEBRIS.
WARNING:
WEAR A DUST
MASK IF BLOWING CREATES DUST THAT
MIGHT BE INHALED.
WARNING:
VERIFY THAT THE
POWER CORD IS DISCONNECTED FROM THE
OUTLET.
CAUTION:
MAKE SURE THE
COLLECTION TANK IS EMPTY BEFORE
USING AS A BLOWER. CLEAR ALL DIRT AND
DEBRIS FROM THE HOSE AND COLLECTION
TANK.
12. Remove the hose 11 from the vacuum port
7 .
13. Insert the larger end of the hose
11
into
the blower port 1 on the back of the
power head and lock into place. Fig. 6 .
Fig. 6
14. Choose the desired accessory and insert
onto the end of the hose
11
. Fig. 7 .
Fig. 7
15. Before turning on the vacuum, firmly hold
onto the loose end of the hose. Plug the
power cord into the outlet. Turn the motor
on by flipping the switch to the ‘I’ ON
position.
WARNING:
ONCE YOU HAVE
COMPLETED BLOWING, FLIP THE POWER
SWITCH TO THE ‘O’ OFF POSITION AND
UNPLUG THE POWER CORD FROM THE
OUTLET.
FILTER INSTALLATION AND CLEAN
UP
Dry Pick Up Operation
NOTICE: Clean or change the filter regularly
for best performance. ALWAYS USE THE
REUSABLE CLOTH FILTER FOR DRY
VACUUMING. If the machine is used without
the reusable cloth filter, the motor will burn out
and the warranty will be voided. Always keep
spare filters on hand.
NOTICE: The filters included are made of high
quality materials designed to stop small dust
particles. The reusable cloth filter should
be used for dry pick-up only. A dry reusable