background image

7

ENGLISH

MAINTENANCE

WARNING: To reduce the risk of serious personal 
injury, turn unit off and disconnect it from 
power source before making any adjustments or 
removing/installing attachments or accessories.

 

WARNING:

  

Risk of unsafe operation. Unit 

cycles automatically when power is on. 
When performing maintenance, you may be 
exposed to voltage sources, compressed air, 
or moving parts. Personal injuries can occur. 
Before performing any maintenance or repair, 
disconnect power source from the compressor 

Customer Responsibilities

Before each 

use

Daily or after 

each use

See tank 

warning 

label

Check Safety Valve

X

Drain Tank

X

Remove tank from 
service

X

1

How to Start

1. 

 to “On” and allow tank pressure 

to build. Motor will stop when tank pressure reaches 

2. 

 clockwise to increase pressure 

Fig. C

To Drain Tank (Fig. A, D)

WARNING:

 

Risk of Unsafe Operation. Air tanks 

contain high pressure air. Keep face and other 
body parts away from outlet of drain. Use 

draining as debris can be kicked up into face. 
WARNING: Risk from noise. Always wear proper 
hearing protection during use. Under some 
conditions and duration of use, noise from this 

NOTE: 

All compressed air systems generate condensate 

that accumulates in any drain point (e.g., tanks, filter, 
aftercoolers, dryers). This condensate contains lubricating 
oil and/or substances which may be regulated and must be 
disposed of in accordance with local, state, and federal laws 

WARNING: Risk of Bursting. Water will condense 
in the air tank. If not drained, water will corrode 
and weaken the air tank causing a risk of air 

NOTICE:

 Risk of Property Damage. Drain water 

from air tank may contain oil and rust which can 

1. 

 to “Off”.

2. 

 counterclockwise to set the 

3. 
4.  Place a suitable container under the drain valve to 

5. 

 allowing air to bleed from 

6. 

 on 

tank.

8

1- For more information, call our Customer Care Center at 1-888-899-0146
or 1-888-331-4569

.

NOTE:

 See

 

Operation 

To Check Safety Valve (Fig. C)

WARNING: Risk of Bursting. If the safety valve 
does not work properly, over-pressurization may 
occur, causing air tank rupture or an explosion. 
WARNING: Risk from Flying Objects. Always 
wear certified safety equipment: ANSI Z87.1 eye 

Before starting compressor, pull the ring on the safety 

 to make sure that the safety valve operates freely. If 

the valve is stuck or does not operate smoothly, it must be 

Summary of Contents for CMXECXA0200341












Reviews: