background image

English

4

at the end of this manual for compatibility of batteries 
and chargers.

• 

Charge the battery packs only in 
CRAFTSMAN chargers.

• 

DO NOT

 splash or immerse in water or other liquids.

• 

DO NOT

 allow water or any liquid to enter battery pack.

• 

Do not store or use the light and battery pack in 
locations where the temperature may fall below -4 ˚F 
(-20 ˚C) (such as outside sheds or metal buildings in 
winter), or reach or exceed 140 ˚F (60 ˚F) (such as 
outside sheds or metal buildings in summer). 
NOTE: Do not store the battery packs in a light with 
the trigger switch locked on. Never tape the trigger 
switch in the ON position.

• 

Do not incinerate the battery pack even if it is 
severely damaged or is completely worn out.

 The 

battery pack can explode in a fire. Toxic fumes and 
materials are created when lithium-ion battery packs 
are burned.

• 

If battery contents come into contact with the skin, 
immediately wash area with mild soap and water. 

If 

battery liquid gets into the eye, rinse water over the open 
eye for 15 minutes or until irritation ceases. If medical 
attention is needed, the battery electrolyte is composed of a 
mixture of liquid organic carbonates and lithium salts.

• 

Contents of opened battery cells may cause 
respiratory irritation.

 Provide fresh air. If symptoms 

persist, seek medical attention.

• 

Battery liquid may be flammable if exposed to spark 
or flame.

• 

Never attempt to open the battery pack for any 
reason. If the battery pack case is cracked or 
damaged, do not insert into the charger.

 Do not crush, 

drop or damage the battery pack. Do not use a battery 
pack or charger that has received a sharp blow, been 
dropped, run over or damaged in any way (e.g., pierced 
with a nail, hit with a hammer, stepped on). Damaged 
battery packs should be returned to the service center 
for recycling.

Storage Recommendations

The best storage place is one that is cool and dry, away 
from direct sunlight and excess heat or cold.  Store the fully 
charged battery pack out of the charger.

Battery Pack Cleaning Instructions

Dirt and grease may be removed from the exterior of the 
battery pack using a cloth or soft non‑metallic brush. Do not 
use water or any cleaning solutions.

Fuel Gauge Battery Packs (Fig. B)

Some  battery packs include a fuel gauge. When the 
fuel gauge button is pressed and held, the LED lights 
will indicate the approximate level of charge remaining. 
This does not indicate tool functionality and is subject to 
variation based on product components, temperature, and 
end‑user application.

BATTERIES AND CHARGERS

The battery pack is not fully charged out of the carton. 
Before using the battery pack and charger, read the 
safety instructions below and then follow charging 
procedures outlined. When ordering replacement battery 
packs, be sure to include the catalog number and voltage.

The label on your tool may include the following symbols. The 
symbols and their definitions are as follows:

BPM ....................beats per minute
V ......................... volts
min .....................minutes

j

 or DC ............direct current

…/min ..............per minute
RPM .................... revolutions  per 

minute

A .........................amperes
Hz .......................hertz
W ........................watts
Wh ......................watt hours
no .......................no load speed
n .........................rated speed

c

 .....................safety alert symbol

h

 ..................... wear  respiratory 

protection

f

 ..................... wear eye protection

i

 ..................... Class II Construction 

(double insulated)

g

 ..................... wear  hearing 

protection

a

 ..................... read  all 

documentation

n

 ..................... avoid staring at 

light

l

 or AC............alternating current

Ah ....................... amp  hours

READ ALL INSTRUCTIONS

Important Safety Instructions for All 

Battery Packs

 

WARNING:

 

Read all safety warnings, 

instructions, and cautionary markings for the 
battery pack, charger and product. Failure to 
follow the warnings and instructions may result 
in electric shock, fire and/or serious injury.

• 

Do not charge or use the battery pack in explosive 
atmospheres, such as in the presence of flammable 
liquids, gases or dust.

 Inserting or removing the battery 

pack from the charger may ignite the dust or fumes.

• 

NEVER force the battery pack into the charger. DO 
NOT modify the battery pack in any way to fit into a 
non-compatible charger as battery pack may rupture 
causing serious personal injury. 

Consult the chart 

unintentionally stare into the light. Serious eye injury 
could result.

 

CAUTION:

 When not in use, place light 

on its side on a stable surface where it will not 
cause a tripping or falling hazard. 

Some tools with 

large battery packs will stand upright on the battery 
pack but may be easily knocked over.

SAVE THESE 

INSTRUCTIONS

Summary of Contents for CMCL060





























Reviews: