Craftsman CMCBL720 Instruction Manual Download Page 6

English

4

READ ALL INSTRUCTIONS

Important Safety Instructions for All 
Battery Packs

 

WARNING

:

 Read all safety warnings, 

instructions, and cautionary markings for the 
battery pack, charger and product. Failure to 
follow the warnings and instructions may result 
in electric shock, fire and/or serious injury.

 

WARNING

:

 Read all safety warnings, 

instructions, and cautionary markings for the 
battery pack, charger and product. Failure to 
follow the warnings and instructions may result 
in electric shock, fire and/or serious injury.

• 

Do not charge or use the battery pack in explosive 
atmospheres, such as in the presence of flammable 
liquids, gases or dust.

 Inserting or removing the battery 

pack from the charger may ignite the dust or fumes.

• 

When battery pack is not in use, keep it away from 
other metal objects, like paper clips, coins, keys, 
nails, screws, or other small metal objects, that can 
make a connection from one terminal to another. 

Shorting the battery terminals together may cause burns 
or a fire.

• 

NEVER force the battery pack into the charger. DO 
NOT modify the battery pack in any way to fit into 
a non-compatible charger as battery pack may 
rupture causing serious personal injury.

•  Charge the battery packs only in CRAFTSMAN chargers.
• 

DO NOT

 splash or immerse in water or other liquids.

• 

Do not store or use the tool and battery pack in 
locations where the temperature may reach or 
exceed 104 °F (40 °C) (such as outside sheds or metal 
buildings in summer).

 For best life store battery packs in 

a cool, dry location.

 

NOTE: Do not store the battery packs in a tool with 
the trigger switch locked on. Never tape the trigger 
switch in the ON position.

• 

Do not incinerate the battery pack even if it is 
severely damaged or is completely worn out.

 The 

battery pack can explode in a fire. Toxic fumes and 
materials are created when lithium-ion battery packs 
are burned.

• 

If battery contents come into contact with the skin, 
immediately wash area with mild soap and water. 

If 

battery liquid gets into the eye, rinse water over the open 
eye for 15 minutes or until irritation ceases. If medical 

attention is needed, the battery electrolyte is composed of 
a mixture of liquid organic carbonates and lithium salts.

• 

Contents of opened battery cells may cause 
respiratory irritation.

 Provide fresh air. If symptoms 

persist, seek medical attention.

 

WARNING

:

 

Burn hazard. Battery liquid 

may be flammable if exposed to spark or flame.

 

WARNING

:

 Fire hazard. Never attempt 

to open the battery pack for any reason. If the battery 
pack case is cracked or damaged, do not insert into 
the charger. Do not crush, drop or damage the battery 
pack. Do not use a battery pack or charger that has 
received a sharp blow, been dropped, run over or 
damaged in any way (e.g., pierced with a nail, hit 
with a hammer, stepped on). Damaged battery packs 
should be returned to the service center for recycling.

Storage Recommendations

1.  The best storage place is one that is cool and dry, away 

from direct sunlight and excess heat or cold.

2.  For long storage, it is recommended to store a fully 

charged battery pack in a cool dry place out of the 
charger for optimal results.

nOTE:

 Battery packs should not be stored completely 

depleted of charge. The battery pack will need to be 
recharged before use.

Battery Pack Cleaning Instructions

1.  Dirt and grease may be removed from the exterior of 

the battery using a cloth or soft non-metallic brush. Do 
not use water or any cleaning solutions.

The RBRC® Seal

The RBRC® (Rechargeable Battery Recycling 
Corporation) Seal on the nickel cadmium, 
nickel metal hydride or lithium-ion batteries 
(or battery packs) indicates that the costs 
to recycle these batteries (or battery 
packs) at the end of their useful life have already been 
paid byCRAFTSMAN. In some areas, it is illegal to place 
spent nickel cadmium, nickel metal hydride or lithium-ion 
batteries in the trash or municipal solid waste stream and 
the Call 2 Recycle® program provides an environmentally 
conscious alternative.
Call 2 Recycle, Inc., in cooperation with CRAFTSMAN 
and other battery users, has established the program in 
the United States and Canada to facilitate the collection 
of spent nickel cadmium, nickel metal hydride or 
lithium-ion batteries. Help protect our environment and 
conserve natural resources by returning the spent nickel 
cadmium, nickel metal hydride or lithium-ion batteries 
to an authorized service center or to your local retailer for 
recycling. You may also contact your local recycling center 
for information on where to drop off the spent battery. 
RBRC® is a registered trademark of Call 2 Recycle, Inc

.

.

BATTERIES AND CHARGERS

The battery pack is not fully charged out of the carton. 
Before using the battery pack and charger, read the 
safety instructions below and then follow charging 
procedures outlined. When ordering replacement battery 
packs, be sure to include the catalog number and voltage.

Summary of Contents for CMCBL720





































Reviews: