background image

4

WARRANTY

GENERAL:

 Craftsman products are warranted to be free from defects in materials 

or workmanship for a specifi c time period as set-out below (the “Warranty Period”). 

 

Warranties extend to the original purchaser of a Craftsman product only.  Purchases 
made through an online auction or through any website other than www.sears.ca are 
excluded.  The relevant Warranty Period commences on the original date of purchase. 
Within this period, Sears Canada, Inc. will, at its sole option, repair or replace any products 
or components which fail in normal use. Such repairs or replacement will be made at no 
charge to the customer for parts or labor, provided that the customer shall be responsible 
for any transportation cost.

EXCLUSIONS:

 This warranty does not cover failures due to normal wear, abuse, misuse, 

neglect (including but not limited to the use of stale fuel, dirt, abrasives, moisture, rust, 
corrosion, or any adverse reaction due to improper storage or use habits), improper 
maintenance or failure to follow maintenance guidelines and/or instructions, failure to 
operate the product in accordance with the owner’s manual or any additional instructions 
or information provided at the time of purchase or in subsequent communications with 
the original purchaser, accident or unauthorized alterations or repairs made or attempted 
by others.  Also excluded from warranty coverage – except as provided below - are the 
following: maintenance, adjustments, components subject to wear including but not 
limited to: cosmetic components, belts, blades, blade adapters, bulbs, tires, fi lters, guide 
bars, lubricants, seats, grips, recoil assy’s, saw chains and bars, trimmer lines and spools, 
spark plugs, starter ropers and tines, and discoloration resulting from ultraviolet light.  Any 
product missing the model and/or serial number identifi cation label will be disqualifi ed 
from coverage under this warranty.

REPAIRS:

 Repairs have a 90 day warranty. If the defective product is still within the 

Warranty Period, then the new warranty is 90 days from the date of repair or to the end of 
the original Warranty Period, whichever period is longer. 

DISCLAIMERS:

 THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE 

EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER ORAL OR 
WRITTEN (OTHER THAN AS STATED HEREIN), AND WHETHER EXPRESS, IMPLIED 
OR STATUTORY, INCLUDING BUT NOT LIMITED TO ANY. THIS WARRANTY 
GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM PROVINCE TO 
PROVINCE.

IN NO EVENT SHALL SEARS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT 
OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE 
OR INABILITY TO USE THE PRODUCT OR FROM DEFECTS IN THE PRODUCT.   THE 
EXCLUSIONS IN THIS PARAGRAPH SHALL NOT APPLY IN JURISDICATIONS WHERE 
APPLICABLE LAW DOES NOT ALLOW FOR THE EXCLUSION OF INCIDENTAL OR 
CONSEQUENTIAL DAMAGES.  IN SUCH JURISDICTIONS, THIS PARAGRAPH SHALL 
NOT APPLY, BUT THE REMAINING PROVISIONS OF THIS DOCUMENT SHALL 
REMAIN VALID.

Sears retains the exclusive right to repair or replace the product or offer a full refund of 
the purchase price at its sole discretion. SUCH REMEDY SHALL BE YOUR SOLE AND 
EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY.

CUSTOMER RESPONSIBILITIES:

 In additional to complying with all suggested 

maintenance guidelines and instructions, customers’ obligations shall include but shall 
not be limited to: operating the product in accordance with the owner’s manual or any 
additional instructions or information provided at the time of purchase or in subsequent 
communications to the purchaser from time to time, exhibit reasonable care in the use, 
operation, maintenance, general upkeep and storage of the product.  Failure to comply 
with these requirements will void any applicable warranty.

29

MODEL NUMBER GCV160-LABHH

HONDA 4-CYCLE ENGINE

 FAN COVER

KEY     PART
NO.      NO. 

DESCRIPTION

 6  16950-Z0Y-003  Petcock Assembly
 7  16952-ZA8-800  Filter, Fuel
  8  16961-Z0L-900  Stay, Fuel Petcock
 9  17511-Z0L-030  Tank, Fuel
 10  17514-Z0L-000  Seal, Fuel Filler Neck
 11 17516-Z0L-000  Clip, Tank Mounting
 12 17532-Z0L-000  Rubber A, Tank Mounting
 13  17533-Z0L-000  Rubber B, Tank Mounting
 14 17534-Z0L-000  Nut, Tank Mounting
 15 17620-Z0J-800  Cap Assembly, Fuel Tank
 16  17636-Z0L-000  Gauge, Fuel Level
21  19610-Z0L-861ZC     Cover Assembly, Fan
     

“T89” (Craftsman Red)

    19610-Z0L-861ZA     Cover Assembly, Fan
     

“T89” (“NH1”) (Black)

    19610-Z0L-861ZD     Cover Assembly, Fan
     

“T93” (Husqvarna Grey)

    19610-Z0L-861ZE     Cover Assembly, Fan
     

“T98” (M.T.D. Red)

 22  19619-ZL8-300  Collar, Fan Cover
24  90013-883-000  Bolt, Flanged (#6 x 12)
   

(CT200)

 25  90015-883-000  Bolt, Flanged (#6 x 28)
   

(CT200)

27  90043-ZL8-000  Bolt, Stud (H=42.5mm)
 28  90043-ZL8-000  Bolt, Stud (H=42.5mm)
33 93913-25220 

Screw, Tapping (PO)

     

(#5 x 12)

 35 91424-Z8B-821  Tube, Fuel Tank
36  91427-Z8B-821  Tube, Fuel (7.3 x 160)
 40 95002-40800-08 Clip, Tube (D8)
42 95002-41200-08 Clip, Tube (D12)

MUFFLER

KEY     PART
NO.      NO. 

DESCRIPTION

 1  18310-ZM0-000  Muffl er
 2  18321-Z0L-J00  Protector, Muffl er
     

(S/N 1243452 and below)

  18321-Z0L-J01 Protector, 

Muffl 

er

     

(S/N 1243453 and above)

  3  90004-ZL8-000  Bolt, Flange  #6 x 79
   

(CT200)

  4  90013-883-000  Bolt, Flange  #6 x 12
   

(CT200)

 5  18381-ZL8-305  Gasket, Muffl er 
 9  18350-ZL8-000  Arrester, Spark
 10 18356-ZL8-000  Plate, Arrester Number
11  90055-ZE1-000  Screw, Tapping  #4 x 6
 12 06180-Z0J-000  Kit, Spark Arrester

FLYWHEEL

KEY     PART
NO.      NO. 

DESCRIPTION

  1  13331-357-000  Key, Special, Woodruff
     

(25 x 18)

 3  30500-ZL8-014  Coil Assembly, Ignition
 4  31105-ZM0-000  Flywheel Assembly
  5  32195-ZM0-800  Wire, Stop Switch
 6  35120-ZM0-003  Switch Assembly,
     

Engine Stop (NC)

  8  75113-ZM0-000  Spring, Brake Lever
 10  90014-952-000  Bolt, Flange (#6 x 14)
   

(CT200)

 11  90018-ZE1-000  Bolt, Flange (#6 x 23)
   

(CT200)

 12  90018-ZE1-000  Bolt, Flange (#6 x 23)
   

(CT200)

 13  90201-Z0T-800  Nut, Special (14 mm)
 14  51125-Z0L-003  Holder, Wire (Fastex)
    90681-959-003  Clip A, Cable (3.8mm)
   

(Black) 

(NIFCO)

15  93892-04012-00  Screw, Washer Head
     

(#4 x 12)

 16  94103-04000 

Washer, Plain (4 mm)

 21 75110-Z0Y-000  Brake Sub Assembly
25  91601-Z0L-300  Grommet, Brake Plate

AIR CLEANER

KEY     PART
NO.      NO. 

DESCRIPTION

 1  15721-ZM0-000  Tube, Breather
 2  17211-ZL8-023  Element, Air Cleaner
  3  17220-ZM0-010  Case Assy., Air Cleaner
     

(S/N 1167575 and below)

    17220-ZM0-020  Case Assy., Air Cleaner
   

(S/N 

1167576–1239013)

    17220-ZM0-030  Case Assy., Air Cleaner
     

(S/N 1239014 and above)

 5  17228-ZM0-000  Gasket, Air Cleaner
 6  17231-Z0L-030  Cover, Air Cleaner
     

(S/N 1167575 and below)

  17231-Z0L-040 Cover, 

Air 

Cleaner

     

(S/N 1167575 and below)

  17231-Z0L-050 Cover, 

Air 

Cleaner

  7  90003-ZM0-010  Bolt, Flange (#6 x 85)
   

(CT200)

Summary of Contents for 944.362200

















Reviews: