4
OPERATION
HOW TO USE YOUR JACK STANDS
TO SUPPORT A VEHICLE
1. Adjust height by pulling up on ratchet
bar.
2. The weight of the locking handle should
lock the ratchet bar into a secure
position. To verify this simply push down
on the locking handle to ensure that the
ratchet bar is secure.
3. Carefully position the stands so that the
load will contact the center of the
saddle.
4. Always use jack stands as a pair and
only on those parts of a vehicle which
can be fully captured between the outer
lugs of each stand’s saddle.
Rated capacity of jack stands is
per
pair
, it is
NOT
the sum of individual
capacities unless specifically noted to
t h e c o n t r a r y b y t h e j a c k s t a n d
manufacturer.
Do Not
exceed rated
capacity.
Ensure
that the vehicle
support points are fully captured
between the outer lugs of both jack
stands.
Use
a matched pair of jack
stands
per
vehicle to support
1
end
only
.
Use
1 pair per vehicle
only
.
Failure to do so may result in sudden
loss of load, which may cause personal
injury and/or property damage.
5. Slowly and carefully lower the load
completely onto the stands, ensure that
the load is centered and captured as
described in Step 4.
6. Check to ensure that load is secure on
stands before working under vehicle.
TO LOWER RATCHET BAR FOR
EASY STORAGE
1. Raise vehicle clear of stands with
suitable jack.
2. Raise the locking handle to allow ratchet
bar to glide down to lowest position.
3. Carefully remove stands.
4. Carefully lower vehicle with jack.
5. Ensure that all tools, equipment and
personnel are clear before lowering
load.
!
BEFORE USE
1. Inspect stands before each use. Do not
u s e i f b e n t , b r o k e n o r c r a c k e d
components are noted. Ensure that all
parts move freely.
2. Before using this product, read the
owner’s manual and familiarize yourself
thoroughly with the product and the
hazards associated with its improper
use.
LOCKING
HANDLE
SADDLE
RATCHET
BAR
JACK STAND
BASE
FRAME
TAB
FIG. 2
KNOW YOUR JACK STANDS
MAINTENANCE
INSPECTION
Periodically inspect each stand. Ensure all
parts move freely. Do not apply oil or
grease to any portion of this product. If rust
appears, sand affected area and cover with
suitable utility paint. Please note that there
are no replacement parts applicable to this
device.
STORAGE
Store stands in upright position and in a
clean, dry area.
For after sale support and assistance:
Call 8:00 AM - 4:45 PM CST., Monday - Friday 1-888-332-6419
50159 3 TON
8-7/8in.X 6-3/4 in. 19.6 LBS (APPROX.)
CAPACITY
PER PAIR
13-7/16 in.
21 in.
(341mm)
(534mm)
SPECIFICATIONS
MODEL
MIN. HEIGHT MAX. HEIGHT BASE DIMENSION NET WEIGHT(2 pcs.)
