manualshive.com logo in svg

Craftsman 486.248476, Operator'S Manual

Share
Download
Craftsman 486.248476 Operator'S Manual Download Page 19

19

TROUBLESHOOTING

 PROBLEM 

CAUSE 

CORRECTION

Scoop won't lock into 
raised/transport position.

Scoop bucket won't lock into level 

position after dumping.

Lift handle trigger won't release 
scoop from the transport position.

Dump handle trigger won't 

release bucket to dump.

Bucket is becoming more difficult 

to tilt up or down.

1.  Index rod is jamming.

2.  Frame is hitting tilt stop  

 

brackets.

1.  Dump control pin does not align  

with the tilt bracket.

1.  Index rod is jamming.

2.  Lift cable is not adjusted properly.

1.  Dump control cable is not adjusted 

properly.

2.  Pin stop bracket is not adjusted 

properly side to side.

1.   Debris is lodged between bucket 

assembly and lift frame.

1.  Apply grease to the bottom slot in the 

lift bracket, where the index rod slides

2.  Adjust the tilt stop brackets as 

instructed on page 16.

1.  Adjust the tilt bracket and lift straps as 

instructed on page 16.

2.  Adjust the stop bolt as instructed on 

page 16.

1.  Apply grease to the bottom slot in the 

lift bracket, where the index rod slides.

2.  Adjust cable nuts as instructed on page 

11.

1.  Adjust parts as instructed in step 17 on 

page 12.

2.  Adjust parts as instructed in step 25 on 

page 15.

1.   Remove all debris from between the 

bucket assembly and the lift frame.

Summary of Contents for 486.248476

























Reviews:

No comments

Brands by name

Popular brands

Load more brands