background image

6

Service Dates

Check for loose fasteners

X

Cleaning

X

X

MAINTENANCE SCHEDULE

Fill in dates as you
complete regular service.

Before 

each 

use

After 

each 

use

Every 

season

Before 

storage

MAINTENANCE/STORAGE

CUSTOMER RESPONSIBILITIES

Read and follow the maintenance schedule and the maintenance procedures listed in this section.

CHECK FOR LOOSE FASTENERS

Before each use make a thorough visual check of
the snow cab for any bolts and nuts which may
have loosened. Retighten any loose bolts and nuts.

CLEANING

The vinyl portion of the canopy can be washed
using water only, or a mild liquid soap and water.

The plastic windows should only be washed using
running water, or a mild liquid soap and water.
Wash the windows with your bare hands only. A
cloth, sponge or brush will scratch the clear plastic.

IMPORTANT:  

Never clean the windows when the

plastic is dry. The clear plastic will scratch.

OPERATION

Read this owner's manual and safety rules before operating your tractor with the Snow Cab.

Check the area of operation thoroughly before
using the tractor with the snow cab. The added
height of the snow cab and a reduced field of
vision require extra caution during operation.

Unfasten the elastic hooks on one side of the snow
cab to get on or off the tractor.

Operate outside controls on a snowthrower or
snow blade through the access flaps in the sides of
the canopy.

Remove the upper snow cab frame and canopy
before you transport the tractor in an open truck or
open trailer.

CAUTION:  Watch out 

for low tree

limbs and other overhead objects which
may interfere with the snow cab.

CAUTION:  Never

 transport the tractor in

an open truck or open trailer while the
snow cab is attached.

STORAGE

Clean the vinyl canopy thoroughly with mild liquid
soap and water. Allow to dry before storing. Refer
to the Cleaning section.

Store the snow cab in a clean, dry area away from
direct sun light.

CAUTION:  

This cab provides foul

weather protection only. It does not
provide protection against exhaust
fumes, collision, rollover or other acci-
dents.

Summary of Contents for 486.24275









Reviews: