Craftsman 315.DD2010, Operator'S Manual

Page: 7 / 24

7 - English
FEATURES
PRODUcT SPEcIFIcATIOnS
Chuck ...........................................................1/2 in. Keyless
Motor ...............................................................19.2 Volt DC
Switch .............................. VSR (Variable Speed Reversible)
No Load Speed ....................... 0-400/0-1,400 r/min. (RPM)
Clutch .............................................................. 24 Positions
Torque ................................................................... 340 in.lb.
Battery Pack Voltage .......................................19.2 Volt DC
knOW YOUR DRILL-DRIVER
See Figure 1, page i.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
BIT STORAGE
Bit provided with the drill-driver can be placed in the
storage area, located on the base of the tool.
DIREcTIOn OF ROTATIOn SELEcTOR
(FORWARD/REVERSE/cEnTER LOck)
Your drill-driver has a direction of rotation (forward/
reverse/center lock) selector located above the switch
trigger for changing the direction of bit rotation. Setting
the direction of rotation selector in the OFF (center lock)
position will lock the switch trigger to help reduce the
possibility of accidental starting when not in use.
kEYLESS cHUck
The keyless chuck allows you to hand-tighten or release
the drill bit in the chuck jaws.
TORQUE ADJUSTMEnT RInG
Your drill has a 24-position clutch. The torque adjustment
ring can be turned to select the right amount of torque for
your application.
TWO-SPEED GEAR TRAIn
The two-speed gear train is designed for drilling or driving
at
LO (1) or HI (2) speeds. A slide switch is located on top
of your drill for selecting either LO (1) or HI (2) speed.
VARIABLE SPEED
The variable speed switch trigger delivers higher speed
with increased trigger pressure and lower speed with
decreased trigger pressure.
WARnInG:
If any parts are damaged or missing do
not operate this tool until the parts are replaced. Use
of this product with damaged or missing parts could
result in serious personal injury.
WARnInG:
Do not attempt to modify this tool
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARnInG:
To prevent accidental starting that
could cause serious personal injury, always remove
the battery pack from the tool when assembling
parts.
UnPAckInG
This product has been shipped completely assembled.

Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
WARnInG:
Do not use this product if it is not
completely assembled or if any parts appear to be
missing or damaged. Use of a product that is not
properly and completely assembled could result in
serious personal injury.

Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.

Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.

If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PAckInG LIST
Drill-Driver
Double-ended Bit
Operator’s Manual
ASSEMBLY