background image

1

TABLE OF CONTENTS

SAVE THESE INSTRUCTIONS!

READ ALL INSTRUCTIONS!

Your risk from these exposures varies, depending on how often you do this type

of work. To reduce your exposure to these chemical: work in a well ventilated area,

and work with approved safety equipment, such as those dust masks that are

specially designed to filter out microscopic particles.

     WARNING:

 

This product maybe contains lead, phthalate or other chemicals

known to the State of California to cause cancer, birth defects and other reproductive
harm. Please wash your hands after use.

!

2

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to possible dangers. 

The safety symbols and the explanations with them deserve your careful attention 

and understanding. The symbol warnings do not, by themselves, eliminate any 

danger. The instructions and warnings they give are no substitutes for proper 

accident prevention measures.

       WARNING: Be sure to read and understand all safety instructions in this

manual, including all safety alert symbols such as 

“DANGER,” “WARNING,” and

“CAUTION” before using this buffer/polisher. Failure to follow all instructions listed 

in this manual may result in electric shock, fire and/or serious personal injury.

SYMBOL SIGNAL MEANING
       SAFETY ALERT SYMBOL:
 Indicates DANGER, WARNING, OR CAUTION.

May be used in conjunction with other symbols or pictographs.

       DANGER: Indicates a hazardous situation which, if not avoided, will result

in death or serious injury. This signal word is to be limited to the most extreme

situations. Always follow the safety precautions to reduce the risk of fire, electric

shock, and personal injury.

       WARNING: Indicates a hazardous situation which, if not avoided, could result

in death or serious injury. Always follow the safety precautions to reduce the risk

of fire, electric shock, and personal injury.

       CAUTION: Indicates a hazardous situation which, if not avoided, could

result in minor or moderate injury.

Damage Prevention and Information Messages
These inform the user of important information and/or instructions that could lead  

to equipment or other property damage if they are not followed. Each message is 

preceded by the word “NOTE,” as in the example below:
NOTE: Equipment and/or property damage may result if these instructions are not 

followed.

                                     WARNING: To ensure safety and reliability, all repairs  

                              should be performed by a qualified service technician.

                                     WARNING: The operation of any power tools can result in 

                              foreign objects being thrown into your eyes, which can result in 

                              severe eye damage. Before beginning power tool operation,

                              always wear safety goggles or safety glasses with side shield 

                              and a full face shield when needed. We recommend a Wide 

Vision Safety Mask for use over eyeglasses or standard safety glasses with side 

shields. Always use eye protection which is marked to comply with ANSI Z87.1 

shields. 

     WARNING:

 

Some dust created by power sanding, sawing, grinding,

drilling and other construction activities contains chemicals known to the state
of California to cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

• 

Lead from lead-based paints;

• 

Crystalline silica from bricks and cement and other masonry products and 

•  

Arsenic and chromium from chemically-treated lumber.

!

CRAFTSMAN LIMITED WARRANTY

FOR ONE YEAR from the date of sale this product is warranted against defects

in material or workmanship.

WITH PROOF OF SALE a defective product will be replaced free of charge.

For warranty coverage details to obtain free replacement,

visit the web page: www.craftsman.com/warranty

This warranty does not cover the bonnets or brushes, which are expendable

parts that can wear out from normal use within the warranty period.

This ONE YEAR warranty is void if this product is ever used while providing

commercial services or if rented to another person. For 90 DAY commercial and

rental use terms, see the Craftsman warranty web page. 

This warranty gives you specific legal rights, and you may also have other

rights which vary from state to state.

Sears Brands Management Corporation, Hoffman Estates, IL 60179

Warranty.........................................................................Page     1
Safety Symbols...............………….................................Page     2
Safety Instructions...............…………............................Pages   3 - 8
Unpacking / Accesories..................................................Page    9  
Description.....................................................................Page    10
Operation...................…………………...........................Pages  11 - 14
Maintenance..................................................................Pages  14-15
Parts List........................................................................Pages  16-17

Summary of Contents for 172.395560











Reviews: