3
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to possible dangers.
The safety symbols and the explanations with them deserve your careful attention
and understanding. The symbol warnings do not, by themselves, eliminate any
danger. The instructions and warnings they give are no substitutes for proper
accident prevention measures.
WARNING:
Be sure to read and understand all safety instructions in this
manual, including all safety alert symbols such as
“DANGER,” “WARNING,”
and
“CAUTION”
before using this buffer/polisher. Failure to follow all instructions listed
in this manual may result in electric shock, fire and/or serious personal injury.
SYMBOL SIGNAL MEANING
SAFETY ALERT SYMBOL:
Indicates
DANGER, WARNING, OR CAUTION.
May be used in conjunction with other symbols or pictographs.
DANGER:
Indicates a hazardous situation which, if not avoided, will result
in death or serious injury. This signal word is to be limited to the most extreme
situations. Always follow the safety precautions to reduce the risk of fire, electric
shock, and personal injury.
WARNING:
Indicates a hazardous situation which, if not avoided, could result
in death or serious injury. Always follow the safety precautions to reduce the risk
of fire, electric shock, and personal injury.
CAUTION:
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
Damage Prevention and Information Messages
These inform the user of important information and/or instructions that could lead
to equipment or other property damage if they are not followed. Each message is
preceded by the word “NOTE,” as in the example below:
NOTE:
Equipment and/or property damage may result if these instructions are not
followed.
WARNING:
To ensure safety and reliability, all repairs
should be performed by a qualified service technician.
WARNING:
The operation of any power tools can result in
foreign objects being thrown into your eyes, which can result in
severe eye damage. Before beginning power tool operation,
always wear safety goggles or safety glasses with side shield
and a full face shield when needed. We recommend a Wide
Vision Safety Mask for use over eyeglasses or standard safety glasses with side
shields. Always use eye protection which is marked to comply with ANSI Z87.1
shields.
2
TABLE OF CONTENTS
SAVE THESE INSTRUCTIONS!
READ ALL INSTRUCTIONS!
Warranty.........................................................................Page 2
Safety Symbols...............………….................................Page 3
Safety Instructions...............…………............................Pages 4 - 8
Unpacking......................................................................Page 9
Description.....................................................................Page 10
Operation...................…………………...........................Pages 11 - 15
Maintenance..................................................................Page 15
Accessories..................................................................Page 16
CRAFTSMAN ONE YEAR LIMITED WARRANTY
FOR ONE YEAR from the date of purchase, this product is warranted
against any defects in material or workmanship. With proof of purchase,
a defective product will be replaced free of charge.
For warranty coverage details to obtain free replacement, visit the web site:
www.craftsman.com
This warranty does not cover the bonnets, which are expendable parts that
can wear out from normal use within the warranty period.
This warranty is void if this product is ever used while providing commercial
services or if rented to another person.
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
WARNING:
Some dust created by using power tools contains
chemicals known to the State of California to cause cancer and birth defects
or other reproductive harm.
!
