background image

2

 

Warranty

IMPORTANT SAFETY INSTRUCTIONS

         CRAFTSMAN ONE YEAR FULL WARRANTY

FOR ONE YEAR from the date of purchase, this product is warranted against 
defects in material or workmanship. A defective product will be replaced free of 
charge.
For warranty coverage details to obtain free replacement, visit the web page: 
www. craftsman.com/warranty
This warranty does not cover bags, filters, hose or attachments, which are 
expendable parts that can wear out from normal use within the warranty period. 
This ONE YEAR warranty is void if this product is ever used while providing 
commercial services or if rented to another person. For 90 DAY commercial and 
rental use terms, see the Craftsman warranty web page.
This warranty gives you specific legal rights, and you may also have other rights 
which vary from state to state.
      Sears Brands Management Corporation, Hoffman Estates, IL 60179

READ AND UNDERSTAND ALL 
INSTRUCTIONS BEFORE USING THIS
VACUUM 

Read and understand this operator's 
manual and all labels on the Wet/Dry 
Vacuum cleaner before operating. Safety is 
a combination of common sense, staying 
alert and knowing how your vacuum works. 
Use this Wet/Dry Vac only as described in 
this manual. To reduce the risk of personal 
injury or damage to your Wet/Dry Vac, use 
only Craftsman recommended accessories.

Household Type

 

SAVE THIS MANUAL

 

FOR FUTURE REFERENCE.

When using an electrical appliance, 
basic precautions should always be 
followed including the following:

WARNING:

TO REDUCE 

THE RISK OF FIRE, ELECTRIC  
SHOCK OR INJURY:

• Do not run vac unattended.

• 

Do not vacuum, or use this Wet/Dry Vac 

  near fl ammable liquids, gases, or explosive
  vapors like gasoline or other fuels,
  lighter fl uids, cleaners, oil-based  paints,
  natural gas, hydrogen, or explosive dusts 
  like coal dust, magnesium dust, grain 
  dust, or gun power. Sparks inside the

  motor can ignite fl ammable vapors or 
  dust.
• Do not vacuum anything that is burning  
  or smoking, such as cigarettes, matches,
  or hot ashes.
• Keep cord away from heated surfaces.
• Do not expose to rain. Store indoors.
• Do not unplug by pulling on cord. To 
  unplug, grasp the plug, not the cord.
• Do not use with damaged cord, plug or     
  other parts.
• If vac is not working as it should, has 
  been dropped, damaged, left outdoors, 
  or dropped into water, take it to a service 
  dealer for inspection and repair before 
  using it again.
• Do not pull or carry by cord, use cord as 
  handle, close a door on cord, or pull 
  cord around sharp edges or corners.
• Do not run Wet/Dry Vac over cord.
• Do not handle plug or the Wet/Dry Vac  
  with wet hands.
• To reduce the risk of health hazards 
  from vapors or dusts, do not vacuum  
  toxic materials.
• Do not store near hazardous materials.
• Do not use this Wet/Dry Vac with a torn 
  fi lter or without the fi lter installed except 
  when vacuuming liquids as described in 
  the operation section of this manual.
• Do not allow to be used as a toy. Close 
  attention is necessary when used by or 
  near children.
• To reduce the risk of injury from accidental

Summary of Contents for 125.38909































Reviews: