Craftsman 108.27807 Page 19 Operator'S Manual Download

Page: 19 / 80

POTENTIAL HAZARD

Operating this ATV after consuming alcohol or drugs.

WHAT CAN HAPPEN

Could seriously affect your judgment. Could cause you to react more slowly. Could
affect your balance and perception. Could result in an accident.

HOW TO AVOID THE HAZARD

Never consume alcohol or drugs before or while operating this ATV.

POTENTIAL HAZARD

Operating this ATV at excessive speeds.

WHAT CAN HAPPEN

Increases your chances of losing control of the ATV, which can result in an
accident.

HOW TO AVOID THE HAZARD

Always travel at a speed that is proper for the terrain, visibility, operating
conditions, and your experience.

POTENTIAL HAZARD

Attempting wheelies, jumps and
other stunts.

WHAT CAN HAPPEN

Increases the chance of an
accident, including an overturn.

HOW TO AVOID THE HAZARD

Never attempt stunts, such as
wheelies or jumps.

WARNING

Summary of Contents for 108.27807

















































































Search results

Summary of Contents for 108.27807

Reviews:

Related manuals for 108.27807

Brands by name

Popular brands

Craftsman 108.27807, Operator'S Manual

Search results

Summary of Contents for 108.27807

Reviews:

Related manuals for 108.27807

Brands by name

Popular brands