12
CHANGING PRESET PARAMETERS
1. To make a change to a preset, navigate to the settings page.
2. Locate the preset you would like to change. Press the button
above the icon that depicts the name of the preset.
3. This will load the parameter select page for that preset. (Pic A)
You will see the name of the cleaning stages and numerical
values. The numerical value is the amount of seconds that stage
will run. Any stage set to zero will be bypassed during the wash
cycle. To make a change to a stage, press the numerical value of
that stage.
4. A pop up will appear allowing you to input a new value. (Pic B)
Enter the new value and press the return button to set the value.
5. You must press the save button to have your new value saved
to the preset.
6. To exit press any tab along the main navigation.
A
B
** VIDEOS AVAILABLE ON YOUTUBE **
