11
The parameter select page shows the
settings for a given preset. The fourteen
cleaning stages are listed in order in
which they occur. You will see the name
of the stage and numerical value. The
numerical value is the amount of seconds
that stage will run. Any stage set to zero
will be bypassed in the cycle.
The alarm page will display any errors or
warnings that the software has detected.
Check this page in case of any problems
for insight of the source for errors.
The I/O or inputs and outputs page will
show you what components are currently
active. Green dots will appear next to the
name of any components currently
active.
SOFTWARE OVERVIEW
** VIDEOS AVAILABLE ON YOUTUBE **
