Electrical Connections Continued…
Ground
Black
White
White
Green
Optional Light
Black
Blue
Light Switch
Figure B
Ground
Black
White
White
Green
Optional
Light
Black
Blue
Light
Switch
Fan
Switch
Black
Figure C
Operation Instructions
1. The sequence of operation for the motor pull/chain switch is OFF-HI-
MED-LOW.
2. Push the slide switch RIGHT for FORWARD, and LEFT for REVERSE
action of the blades.
3. The pull chain switch for the lighting is two positions - ON/OFF.
4. The pull chain switch for the uplighting is on/off.
NOTE:
Uplighting takes
3-60W Candelabra bulbs (not included).
13
CAUTION
Even if your fan is mounted with the blades more than 7 feet from the floor, be
careful to avoid placing your raised arms or any object in the path of the blades.
14
Electrical Connections
Ground
Black
White
Blue
Black
White
Green
Optional Light
Figure A
Connect black and blue (if provided) fan wires to black outlet wire. Connect
white fan wire to white outlet wire and green grounding lead wire from the
grounding conductor to the supply circuit (see figure A). Use wire connectors
provided with your fan. No loose strands or loose connections should be
present. After wires have been connected, they must be spread apart so the
green and white are on one side of the outlet box and the black and blue
are on the other side. Turn
splices upward and carefully
push all wiring into outlet
box. For optional wall
control see figure B or
Figure C for alternate wiring.
When wall switches are employed,
switches should be UL listed
for use with ceiling fan.
NOTE:
Make sure fan on/off switch
is always at "high speed" location if
your fan is controlled by additional
wall switch.
Slide Switch
Motor Pull Chain
Light Pull Chain
