page 7
10. Automated Learning Process./Activating Code.
1-6
Remove battery cover on front of remote control transmitter.
Install 12-volt battery (provided) in transmitter and wall control (if applicable).
IMPORTANT
: Store the transmitter away from excess heat or humidity. To prevent damage to transmitter,
remove the battery if not used for long periods.
Fan
SPEED
control buttons
1-6
:
Use to control the ceiling fan speed 1-6
REVERSE
:
Use to control fan direction
CODE SWITCHES
and
LEARN
button
:
With fan power off, arrange
CODE SWITCHES
to desired code
setting. Turn fan power on, press and hold
LEARN
button on front
of remote control and on wall control (if applicable) for 5 seconds
within 60 seconds of powering fan in order to synchronize with fan
motor.
UP LIGHT
:
Use for up-light (if applicable).
DOWN LIGHT
: Use for down light.
ON
/
OFF
:
Use to turn transmitter on or off.
Replace the battery cover on transmitter.
remote control
FRONT
12
3
4
D
12V
ON
ECE
ON
UP BULB
DOWN BULB
ON/OFF
REVERSE
1
2
3 4
5
6
1
2
3
4
5
6
LEARN
IMPORTANT:
If you prefer to use both,
the remote and wall
controls, they must be
SYNCHRONIZED with
fan in order to
properly function.
wall control (optional)
IMPORTANT:
The code switches in
remote and wall
controls MUST MATCH
for fan to function
properly when you are
using both controls.
12
3
4
D
12V
ON
ECE
ON
