blade
(
view from
underside
)
blade arm
motor housing
blade attachment
screws and washers
9. Final Assembly.
metal cover
motor
housing
Align grooves in metal cover with nodules on
underside of motor housing. Push up on metal
cover and then turn metal cover to the
RIGHT
(clockwise)
until it no longer turns.
page 9
8. Blade Assembly.
WARNING
: To reduce the risk of serious
bodily injury,
DO NOT use power tools to
assemble the blades. If screws are
overtightened, blades may crack and break.
Time Saver
: Washers for blade attachment
screws can be set on each screw prior to
installing blades.
Locate 9 blade attachment screws and
washers in hardware pack. Slide a blade
through one of the narrow, rectangular
openings on the motor housing, aligning
holes in blade with holes in blade arm,
which is pre-attached to the
underside
of
the motor housing and located
inside
the
motor housing--
refer to drawing at right
.
Insert 3 blade attachment screws (along
with washers) with fingers first and then
tighten screws securely with a Phillips
screwdriver. Repeat procedure for each
remaining blade.
NOTE
: Tighten blade attachment screws
twice a year.
