page 7
7. Canopy Assembly.
hanging bracket
screw
screw
canopy cover
canopy
antenna
Locate 2 screws on underside of hanging bracket
and remove screw closest to the open end of the
hanging bracket. Partially loosen the other screw.
Lift canopy to hanging bracket. Place rounded part
of slotted hole in canopy over loosened screw in
hanging bracket and push up. Twist canopy to
lock. Re-insert screw that was removed and then
tighten both screws securely.
Slide canopy cover up to canopy. Press up gently
but firmly on canopy cover until you hear it snap
onto the bottom of the canopy.
*Remember that antenna for remote control
receiver must rest
outside
of hanging bracket.
