page 4
Remove 6 screws and washers from yoke
plate (located on top plate on top of motor
housing) and set aside. Lift yoke plate and top
plate to remove from motor housing and set
aside.
Time Saver:
Washers can be set on each
blade plate screw prior to installing blades.
Locate blade attachment screws/washers in
hardware pack. Slide blade through one of
the rectangular openings on center band of
motor housing, aligning holes in blade with
holes in blade arm (located
inside
motor
housing). Insert 3 blade attachment
screws/washers with fingers first and then
tighten screws securely with a Phillips
screwdriver. Repeat procedure for each
remaining blade.
WARNING
: To reduce the risk of serious
bodily injury,
DO NOT use power tools to
assemble the blades. If overtightened, blades
may crack and break.
Re-attach top plate and yoke plate to yoke
using washers and screws previously
removed.
Be sure that cutouts on top plate and
yoke plate aligns over yoke set screws for a
proper fit.
Tighten screws to secure top plate
and yoke plate.
["Fan Assembly" continued on next page.]
5. Fan Assembly.
blade
top plate
yoke
center band
on motor housing
yoke plate
blade attachment
screws/washers
blade
arms
reverse switch
blade
arms
