page 8
9. Light Kit Assembly.
Remove 1 screw from motor plate on
underside of motor housing and partially
loosen the other 2 screws. Align slotted holes in
center of shade with loosened screws in motor
plate, allowing molex connections from motor
housing to come through hole in middle of
shade. Twist shade to lock. Re-insert screw that
was previously removed and securely tighten
all 3 screws with Phillips screwdriver.
Remove 1 screw from inside of shade and
partially loosen the other 2 screws.
Connect
WHITE
wire from motor housing to
WHITE
wire from light kit fitter. Connect
BLACK
wire from motor housing to
BLACK
wire from
light kit fitter. Be sure molex connections snap
together securely.
Align slotted holes in light kit fitter with
loosened screws in shade. Twist light kit fitter
to lock. Re-insert screw that was previously
removed and tighten all 3 screws securely.
Install three 60 watt max. candelabra base
bulbs (included).
Important
: When replacing bulbs, please allow
bulb(s) and shade to cool down before
touching them.
shade
motor plate
motor housing
shade
motor housing
bulb
light kit fitter
