page 10
12. Light Kit Assembly (Optional).
WARNING:
Failure to disconnect power supply at main
panel prior to light kit assembly may result in serious
injury.
IF YOU WISH TO USE YOUR FAN WITH A LIGHT KIT
(sold separately)
, loosen 3 screws on switch housing.
Twist switch housing to remove from fitter plate.
(Refer to
diagram a
.)
IMPORTANT:
Any light kit purchased for use with this
fan
MUST be UL-APPROVED for DAMP LOCATIONS
or OUTDOOR USE.
Locate
BLACK
(or
BLUE
) and
WHITE
wires in the
motor housing labeled FOR LIGHT. (Refer to
diagram a
.)
Remove finial from switch housing. (Refer to
diagram b
.) Remove hex nut and lock washer from
threaded rod on light kit fitter. Push wires from light
kit fitter through hole in middle of switch housing
and screw switch housing onto threaded rod,
followed by lock washer and hex nut that were
previously removed. Tighten hex nut over lock
washer for a secure fit. (Refer to
diagram b
.)
Connect
WHITE
wire from light kit fitter to
WHITE
wire from motor housing. Connect
BLACK
wire from
light kit fitter to
BLUE
(or
BLACK
) wire from motor
housing. Be sure molex connections snap together
securely. Align slotted holes in switch housing with
loosened screws in fitter plate. Twist switch housing
to lock and securely tighten all 3 screws.
Attach glass shade(s) to light kit fitter using the
hardware provided with the light kit. (Refer to
diagram c
.)
NOTE
: If you are installing a bowl fixture, the bulb(s)
must be installed
first
.
Install bulb(s) specified by the light kit. (Refer to
diagram c
.)
If you are installing a halogen bulb, be
sure not to handle glass directly with your fingers as oil
from the skin may shorten the life of the bulb.
Important
: When changing bulbs, remember to
allow bulb(s) and glass shade(s) to cool before
touching.
bulb
[
representative only
]
glass shade
[
representative only
]
motor
housing
switch housing
light kit fitter
[
representative only]
fitter plate
switch housing
light kit fitter
[
representative only
]
switch housing
hex nut
lock washer
diagram c
diagram b
diagram a
finial
white
wire
black (or
blue) wire
