7. Wiring.
page 7
8. Canopy Assembly.
Raise canopy to hanging bracket, aligning
loosened screws in hanging bracket with slotted
holes in canopy. Twist canopy to lock. Re-insert
screws (with washers) that were previously
removed (on page 4, Section 4) and then secure
all screws with Phillips screwdriver.
slotted
hole
WARNING
: Turn off circuit breakers to current
fixture from breaker panel and be sure switch is
turned to the OFF position.
CAUTION
:
Be sure outlet box is properly grounded
and that a ground wire (
GREEN
or Bare) is present.
Make sure all electrical connections comply with
Local Codes or Ordinances and the National
Electrical Code. If you are unfamiliar with electrical
wiring or if the house/building wires are different
colors than those referred to below, please use a
qualified electrician.
When downrod is secured in place on the
hanging bracket, electrical wiring can be
made as follows:
Connect
BLACK
and
BLUE
wire from fan to
BLACK
wire from ceiling with wire connector
provided. Connect
WHITE
wire from fan to
WHITE
wire from ceiling with wire connector
provided.
Connect all
GROUND
(
GREEN
) wires together
from fan to
BARE/GREEN
wire from ceiling with
wire connector provided.
If you intend to control the fan light with a
separate light switch connect
BLUE
wire from
fan to the
BLACK
supply from the independent
switch.
* Wrap each wire connector separately with
electrical tape as an extra safety measure.
This fan is remote control adaptable (remote
control sold separately).
black
black
white
white
blue
black supply wire
ground (green
or bare)
white supply wire
*
from ceiling
from fan
ground
(green or bare)
canopy
hanging bracket
