11
Step 11
5 Blade Installation
Remove rubber cushions, saving motor screws for blade installation. Using
motor screws (S5) provided, line up holes from the blade arm with the
holes in the motor housing. Tighten screws securely.
Connector
Decorative Bottom Cap (#9)
Modular Wiring Plug (A)
Mounting Plate (E)
Modular Wiring Plug (B)
Switch Housing (#9)
Shade (#8)
Finial (#12)
Fan Motor (#5)
Shade Mounting Screw (S9)
12
Step 12
1. Install 22w circulon bulb by sliding bulb into clips on fan motor. To
install, locate both modular wiring plugs (A) and (B). One extends from
the fan body and one extends from the Circulon bulb (#8). Align the two
plugs so the latch on the side of the plugs will engage when pushed together.
Push the two plugs firmly together until latched.
2. Raise fan light shade (#8) onto fan motor (#5) and secure with Shade
Moutning Screw (S9). Next attach Decorative Bottom Cap (#9) and finial
(#12) to secure unit.
IMPORTANT:
Be sure that no wires are caught or pinched during assembly.
