13
Step 13
For blade assembly, position blade arm so that all screw holes are aligned
(as shown in figure below). Using blade screws (S4), insert through top
of blade holder, through blade, and into blade ornament. Tighten
securely.
CAUTION:
Install blade holders to motor only after motor installation is complete. This will
prevent damage to the blade holders which have been carefully balanced.
IMPORTANT: Remove rubber cushions, saving motor screws for installation.
Blade (5)
Blade Arm (10)
12
Step 12
Attach canopy (#3) to the
mounting bracket by placing
screws (S2) into slot in canopy.
Twist clockwise to lock
into place. Tighten screws
firmly.
Bottom of Canopy
Screws (S2)
Canopy (3)
Ceiling
View From Top
Operation Instructions
1. The sequence of operation for the motor pull/chain switch is OFF-HI-
MED-LOW.
2. Push the slide switch RIGHT for FORWARD, and LEFT for REVERSE
action of the blades.
3. The pull chain switch for the lighting is two positions - ON/OFF.
Slide Switch
Motor Pull Chain
Light Pull Chain
CAUTION:
Even if your fan is mounted with the blades more than 7 feet from the
floor, be careful to avoid placing your raised arms or any object in the path of the blades.
