Craftex CX125, User Manual, Page: 12 / 34

12
UNPACKING OF THE CX125
This machine has been carefully packed in
order to protect it during transport. While
unpacking thoroughly go through the box
and separate all items from the materials
used for packaging. It is always wise to
inspect all items for shipping damage. In the
event of any damaged items please call
Busy Bee Tools customer service at
1.800.461.2879.
NOTE
Please keep all material used in packaging
until you are satisfied with your machine
and have rectified any issues between Busy
Bee Tools or the agent of shipping. (Ex:
Shipping damage claim)
INVENTORY LIST
The following is an itemized list of the items
that come with your new machine. Before
you begin following the procedures for
setup of the machine lay out everything and
check that it matches the inventory list.
ITEMS Qty
A. Dust Bag: 1
B. Dust Port 2-3/8: 1
C. Dust Bag Clamp: 1
D. Power Cord wraps: 2
E. Cutterhead Adjustment Crank
Arm: 1
F. Cutterhead Adjustment Crank
Handle:............................................ 1
G. Hex Wrench 4mm:............................1
H. Knife Change magnets: 2
I. Other Hardware (not pictured)
Flat washer 5mm: 1
M5-.8 x 25 button Head
Cap Screw: 1
M5-.7 x 10 Phillips
Head Screw: 4
NOTICE
If an item appears to be missing from items
inventory list carefully go through packaging
materials and inside of the machine as they
may have been pre-installed at the factory
or misplaced during unpackaging.