Craftex CX118, User Manual

Page: 7 / 26

7
UNPACKING
The machine is properly packaged in a
crate for safe transportation. When
unpacking, carefully inspect the crate and
ensure that nothing has been damaged
during transit.
While doing the inventory if you can not find
any part, check if the part is already
installed on the machine.
LIST OF CONTENTS
A. Band Saw.......................................... 1
B. Table ................................................. 1
C. Table Insert ....................................... 1
D. Fence ................................................ 1
E. Fence Guide Rail .............................. 1
F. Blade Quick Release Tension Lever . 1
G. Hex Wrenches, 3mm 6mm................ 2
H. Wrench.............................................. 1
I. Miter Gauge ...................................... 1
J. Stand Legs ........................................ 4
K. Rubber foot ....................................... 4
L. Upper Short Braces........................... 2
M. Upper Long Braces ........................... 2
N. Lower Short Braces........................... 2
O. Lower Long Braces ........................... 2
P. Hardware Package............................ 1
Q. User Manual ...................................... 1
SETUP
The unpainted surface of the table is coated
with a rust preventive waxy oil and you will
want to remove this before you begin
assembly. Use a solvent cleaner that will
not damage painted surfaces.
When setting up your machine, you will
want to find an ideal spot where your band
saw will most likely be positioned most of
the time. Consider your complete work
environment before placing your machine in
the ideal spot.
WARNING!
CX118 is a heavy machine. While
moving the machine do not overexert
yourself. Get the help of an assistant or
use a fork truck to move the machine to
the ideal spot in your shop.