CraftBot CB4 FLOW Series, User Manual

Page: 10 / 41

10
5. ASSEMBLING THE CRAFTBOT PRINTER
5.1. CRAFTBOT FLOW /XL PRINTER
•
Installing the filament guide tube holders
Select the desired position for filament guide holders. Choose their position so
that the filament spool bracket fits beside them.
Plug the connectors at the ends of the filament guide holder cables into the
encoder ports.
•
Installing the filament guide tubes
Locate the filament guide tube.
Insert one end of the filament guide tube into the filament guide tube holder
on top of the CraftBot appliance.
Push the other end into the hole on the top of the extruder.
•
Installing the filament spool holders
Locate the filament spool holder.
Using a hex wrench, install the filament spool holder next to the filament guide
tube holders.
•
Mounting the filament spools
Fit the filament spool onto the filament spool holder so that the lead end keeps
its course when the filament is fed into the filament guide tube holder.
•
Attaching the powercord
Ensure that the power switch on the CraftBot is set to the OFF position.
Find and then insert the AC power cord into the power input on the back of the
CraftBot.