8
9
FEATURES
KNOW YOUR DRILL
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
AUTO-SPINDLE LOCK
Your cordless drill has an auto-spindle lock which makes
installing and removing bits much easier. When the switch
trigger is released and the motor comes to a complete
stop, you may hear a click. The click you hear indi-
cates the auto-spindle lock has engaged and locked the
spindle. With the spindle locked, you can easily install or
remove bits by turning the chuck sleeve with one hand.
The auto-spindle lock disengages when the motor starts
again.
CHARGER
The charger has a key-hole hanging feature for conve-
nient, space-saving storage. Screws should be installed
so that the center distance is 4-1/2 in.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCK)
Your drill has a direction of rotation (forward/reverse/
center lock) selector located above the switch trigger for
changing the direction of bit rotation. Setting the switch
trigger in the
OFF
(center lock) position helps reduce the
possibility of accidental starting when not in use.
KEYLESS CHUCK
The keyless chuck allows you to hand-tighten or release
the drill bit in the chuck jaws.
TORQUE ADJUSTMENT RING
Your drill has a 24-position clutch. The torque adjustment
ring can be turned to select the right amount of torque for
your application.
TWO-SPEED GEAR TRAIN
The two-speed gear train is designed for drilling or driving
at
LO (1)
and
HI (2)
speeds. A slide switch is located on
top of your drill for selecting either
LO (1)
or
HI (2)
speed.
VARIABLE SPEED
The variable speed switch trigger delivers higher speed
with increased trigger pressure and lower speed with
decreased trigger pressure.
UNPACKING
This product has been shipped completely assembled.
n
Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
n
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
n
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
n
If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PACKING LIST
1/2 in. Drill-Driver
Battery Packs (2)
Charger
Case
Double-ended Screwdriver Bits (2)
Operator’s Manual
ASSEMBLY
WARNING:
If any parts are missing do not operate
this tool until the missing parts are replaced. Failure
to do so could result in possible serious personal
injury.
WARNING:
Do not attempt to modify this tool
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
