CRADLEPOINT
MBR1400| USER MANUAL Firmware ver. 3.5.0
© 2012
CRADLEPOINT, INC. PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 128
Initiation Mode:
―
Always On
”
or
―
On Demand
.
‖ ―
Always On
‖ is used if you want the tunnel to initiate the tunnel
connection whenever the WAN becomes available. Select
On Demand
if you want the tunnel to initiate a connection if
and only if there is data traffic bound for the remote side of the tunnel.
Tunnel Enabled
: Enabled or Disabled.
MBR1200 Quick Connect
: VPN tunnels in the MBR1400 have more choices than they do in the MBR1200, so it is more
complex to configure. Check this box to simplify setup by streamlining your options.
7.4.2
Page 2-3: Local and Remote
Networks
Local Network
: The
Network Address
and
the
Netmask
define what local devices have
access to or can be accessed from the VPN
tunnel. The MBR1400 will automatically fill in
the values for your network, but you can
change the values to limit the tunnel to only
some of the devices in your network.
NOTE
:
The local network IP address
must
be
different from the remote network IP address.
Remote Network:
Enter the remote
Gateway
's IP address or fully qualified
domain name (my.domain.com). It is
recommended you use a dynamic DNS host
name instead of the static IP address. By using the dynamic DNS host name updates of the remote WAN IP are
compensated for while connecting to a VPN tunnel.
Enter the
Network
IP address with the
Subnet Mask
to define the remote network subnet that the local devices will have
access to.
NOTE
:
The remote network IP address
must
be different from the local network IP address.
Summary of Contents for MBR1400 Series
Page 1: ......
