70
5.4.5 Power dispatch
Move the cursor to “5 Dispatch” in the main interface and press
ENT
to go
to the following interface (Figure 5-13):
5 Dispatch
ActivePower(%)
100.0
PowerFactor
1.000
Figure 5-13 Active Power and PowerFactor
Remote power dispatch: The
“ActivePower” and “PowerFactor” can be
adjusted remotely by software.
5.4.6 System protection parameters setup
Press
DOWN
and
ENT
at the same time in the main interface and enter
the password (UP -> DOWN -> UP -> DOWN) to access the system protection
parameters setup menu. This menu includes 6
submenus: “1 SysPara”, “2
Restart”, “3 Recover”, “4 ClrErrRecd” and “5 Stdset”, as shown in Figure 5-14.