CONTINUOUS BAGGING SYSTEM
Continuous Bagging System
A) INSTALLING NEW BAGS
1) Remove the black plastic holder by pressing the three spring steel
tabs on the bottom of the metal adaptor.
**
Note:
When the tabs on the bottom are pressed inward, the
plastic bag holder will slide downward for removal.
2) Place the plastic bag holder on a flat surface as shown in the
photo #1. Place a new bag set in the bag holder as shown. When
properly installed, the loose outer end of the continuous bag will
face downward as shown. Cut the packaging strings as shown in
photo #2. Do not cut the packaging string until you have properly
installed the bag set in the bag holder.
3) Re-install the plastic bag holder on the metal adaptor, as shown in
photo #3 so that the three spring steel tags lock under the holder.
Photo 1- Bag set in holder
correctly.
Photo 2- Cutting Package
Strings.
Photo 3- Install Bag Holder on Adaptor.
12
24/7 Technical Support- Toll Free 1-877-472-8200
Concrete Polishing Solutions- Cat 5 Pro Vacuum Operator’s Manual
