CPS BlackMAX VPC Series Operation Manual Download Page 8

#73-151

Troubleshooting Chart

Condition

Possible Problem

Solution

Unusually noisy

1. Bad bearings.
2. Loose motor bolts.
3. Dirty, low, or improper oil.
4. Air leaks in connections.

1. Replace motor.
2. Tighten bolts.
3. Replace oil.
4. Fix leaks.

High temperature

1. Worn bearings.
2. Low oil level.

1. Replace motor.
2. Add or replace.

Poor vacuum

1. System leaks.
2. Low oil level.
3. Dirty oil.
4. Air leaks at connection.
5. Air leak through seal.
6. Worn rotary mechanism.

1. Fix leaks.
2. Add or replace oil.
3. Flush and replace oil.
4. Fix leaks.
5. Replace shaft seal.
6. Replace cartridge.

Oil leaks

1. Oil leaks through exhaust.
2. Oil leaks through shaft seal.
3. Oil leaks through 

reservoir.

4. System vented pressure.
5. Pump tipped over.

1. Oil level too high.
2. Replace shaft seal.
3. Tighten bolts or replace 

gasket.

4. Check oil level.
5. Check oil level.

Pump does not start

1. No power to motor.
2. Power Switch to ON

1. Check battery

CPS

®

 Products, Inc. guarantees that all products are free of manufacturing and material defects to the original owner 

for one year from the date of purchase. If the equipment should fail during the guarantee period it will be repaired or 

replaced (at our option) at no charge. This guarantee does not apply to equipment that has been altered, misused or 

solely in need of field service maintenance. All repaired equipment will carry an independent 90-day warranty. This repair 

policy does not include equipment that is determined to be beyond economical repair.

Warranty

CPS Products, Inc.

CPS Products, Inc. U.S.A. (Headquarters)

1010 East 31st Street, Hialeah, Florida 33013, USA

Tel: 305-687-4121, 1-800-277-3808, Fax: 305-687-3743

e-mail: [email protected]

website: www.cpsproducts.com

CPS Canada

4605 Crysler Ave. Niagara Falls, Ontario L2E 3V6

Tel: 905-358-3124, Fax: 905-358-7187, 1-866-629-3895,

e-mail: [email protected]

CPS Products N.V

Krijgsbaan 241, 2070 Zwijndrecht, Belgium

Tel: (323) 281 30 40, Fax: (323) 281 65 83, 

www.cpsproducts.be

,

e-mail: [email protected]

CPS Australia PTY. LTD.

109 Welland Avenue, Welland, South Australia 5007

Tel: +61 8 8340 7055, Fax: +61 8 8340 7033

e-mail: [email protected]

www.cpsproducts.com

8

Summary of Contents for BlackMAX VPC Series









Reviews: