CPS BlackMAX VPC Series Operation Manual Download Page 3

GENERAL INFORMATION

3

General Safety Instructions

ONLY QUALIFIED SERVICE PERSONNEL SHOULD OPERATE THIS UNIT. SOME COUN-

TRIES MAY REQUIRE THE USER TO BE LICENSED. PLEASE CHECK WITH YOUR LOCAL 

GOVERNMENT AGENCY.

CAUTION: THIS EQUIPMENT IS INTENDED FOR USE OF FINAL EVACUATION OF A REFRIG-

ERANT SYSTEM. THE EVACUATION OF MATERIALS ABOVE 5 PSIG MAY CONTAMINATE 

OR DAMAGE THE VACUUM PUMP.

CAUTION: DO NOT RUN THIS EQUIPMENT WITH LOW OR NO OIL. RUNNING THIS EQUIP-

MENT WITH NO LUBRICATION WILL CAUSE PREMATURE 

FAILURE.

DANGER

  -  Avoid  breathing  refrigerant 

vapors and lubricant vapor or mist. Breathing 

high concentration levels may cause heart 

arrhythmia, loss of consciousness, or even 

cause suffocation.

CAUTION

 - Review battery and battery charger 

information. Do not charge damaged batteries. 

Risk of overheating and fire.

WARNING

 - Do not operate the vacuum pump 

on systems under pressure. Damage to the 

pump may occur.

CAUTION 

- All hoses may contain liquid refriger-

ant under pressure. Contact with refrigerant may 

cause frostbite or other related injuries. Wear 

proper personal protective equipment such as 

safety goggles and gloves. When disconnecting 

any hose, please use extreme caution.

CAUTION

 - Avoid breathing refrigerant vapors 

and/lubricant mist. Exposure may irritate eyes, 

nose, throat and skin. Please read the manu

-

facturers Material Safety Data Sheet for further 

safety information on refrigerants and lubricants.

CAUTION

 - Do not use this equipment in the 

vicinity of spilled or open containers of gasoline 

or other flammable substances. Make certain 

that all safety devices are functioning property 

before operating the equipment.

Summary of Contents for BlackMAX VPC Series









Reviews: