40
Figure 3-36 Crimp RJ45 connector on the RS485 and Ethernet cable
(1)
(2)
(1) RS485 communication of single inverter
(2) RS485 network communication
Figure 3-37 Fasten the cable terminal on the RS485 5 pin connector
a.) Put the communication cable through the conduits inside the wiring box, and
crimp the cable as shown in Figure 3-36 and Figure 3-37.
Tools: Wire stripping pliers, crimping pliers (for RJ45 connector)
Wire stripping pliers, 2 or 2.5mm (0.08in. or 0.1in.) flat screwdriver (for 5
pin connector)
b.) Plug the crimped connector into the corresponding port.
1 -----NC
2 -----NC
3 (Red)--------RS485+
4 (Blue) -------RS485-
5 (Green)----- COM
